Rigid Polycristal are polyurethane resins excellent for casting decorative objects, prototypes, scale models, sculptural reproductions, duplicate masters and much more. A 1:1 mix by volume makes PolyCristal products simple to use.
Low viscosity liquids make for perfect detail penetration, pressure techniques are recomended.
Kit 2.2 lb
Part A 1.10 lb
Part B 1.10 lb
Hardness Shore D from 67 to 73
Separate quantities of 2 components by volume or weight in 2 clean containers and pour the two parts into a larger and clean container.
Mix well, scraping sides and bottom repeatedly. Pour in to the mold properly prepared within 10 to 12 minutes.
Tightly close containers after use.
WARNING: May cause irritation to the skin and eyes.
Avoid contact with eyes, skin and clothing. Do not eat.
Wash your hands after handling the product. First Aid: In case of contact with skin, wash with soap and plenty of water. In case of contact with eyes, flush with water for 15 minutes and contact your ophthalmologist. If swallowed, drink water to dilute the product, induce vomiting and seek medical advice. In case of spillage, absorb with inert material and separate the waste into a suitable container and dispose according to local legislation.
Keep out of reach of children.
User is responsible for determining the suitability of the product application and assume all risks inherent in the use of the product.